Part Five: Scanning Mode; Part Six: Memory - Lixmark D90E series User Manual

light can be flashing, when receiver get the barcode data, indicator light
of antenna will be flashing too, then the barcode data will show at the text
input line.

Part Five: Scanning Mode

1. Please keep the scanner and barcode at certain distance, best reading
distance is 15-20cm.
2. Please follow the following correct reading method to read the barcode,
3. When barcode scanning, please make sure scanner and receiver are inside
effective transmission distance.

Part Six: Memory

When scanner is far away from the receiver or environment interferes, data
transmission will fail, at this moment, scanner can record the reading barcode
data. After communication signal return to normal, according to "first-in
first-out" principle, scanner can send out the recorded barcode data
automatically. If fail to send out, buzzer "Di-Di" two ticking sounds.
Two reasons of failure: first one, the distance between scanner and receiver is
beyond effective transmission distance; second one, influenced by other signal
5