Error Check Switch Settings - Lixmark D90E series User Manual

\ F N C 3 0 4 0 8 0 1
\ F N C 3 0 4 1 0 0 1
\ F N C 3 0 4 1 1 0 1
\ F N C 3 0 4 1 4 0 1
5.

Error Check Switch Settings

There is error-checking code for some barcode type. The code value can be
used for checking whether the barcode is recognized correctly or not. If open
this function, means use check code to calibrated with barcode characters, if
calibrate error, then it would be considered as misrecognition, cannot output
barcode. User can open or close the error-checking of a barcode by manual
according to user's needs. Scan the setting barcode "Error-checking Enable" of
corresponding barcode type can open this function; scanning the setting barcode
"Error-checking Disable" of corresponding barcode type can close.
Warning: Because check code not only can be used to checkout, but also can be
used as barcode character, so users should use this function prudently before
confirming the specific property of barcode that recognized.
\ F N C 3 0 4 0 8 0 0
\ F N C 3 0 4 1 0 0 0
\ F N C 3 0 4 1 1 0 0
\ F N C 3 0 4 1 4 0 0
24