Table of Contents
Advertisement
When Scan "HYCOCMD-ALLBAR", recognize all letters and digits of
barcode. At this time, if barcode less than or equal to 15 characters (including
Enter or Tab character), the maximum recorded number is 512 bar codes. When
record reach 500 bar codes, scanner head will close. More than 15 and less than
or equal to 30 characters (including Enter or Tab character), the maximum
recorded number is 256 bar codes; when record reach 250 bar codes, scanner
head will close. More then or 30 and less than or equal to 45 characters
(including Enter or Tab character), the maximum recorded number is 170 bar
codes, when record already 166 bar codes, scanner head will close.
When scan "HYCOCMD-NUMBAR", only recognize the digits of barcode,
ignore letters. At that time, if barcode less than or equal to 30 characters
(including Enter or Tab character), the maximum recorded number is 512 bar
codes. When record reach 500 bar codes, scanner head will close. More than 30
and less than or equal to 60 characters (including enter and tab character), the
maximum recorded number is 256 bar codes, when record reach 250 bar codes,
scanner head will close.
Scanner default value: all letters and digits of recognized barcode, which is
"HYCOCMD-ALLBAR".
10.
Digit Barcode
Digit barcode 0~9, is the Auxiliary barcode of setting barcode.
\ F N C 3 1 1 0 1 0 0
\ F N C 3 1 1 0 1 0 2
\ F N C 3 1 1 0 1 0 1
\ F N C 3 1 1 0 1 0 3
28
Advertisement
Table of Contents
