Part Fourteen: Problems Solutions - Lixmark D90E series User Manual

Operating Humidity
Storage Humidity
ESD
Drop Specification
Intensity Of Light
EMI
Anti-EMI
Waterproof & Dustproof
Materials

Part Fourteen: Problems Solutions

Problems
Follow up the
operating
Instructions, but
scanner no reaction
Cannot start after
pressing the scanner
button
Indicator light is off
when scanner is
recharging
With laser line but
cannot decode
5%-85%(Non-Condensing)
5%-85%(Non-Condensing)
±15kVDC Air Discharge,±8kVDC
Direct/Indirect Discharge
1.5m
Light 4.000luX max
EN50081，par1
EN50082，par1
IEC529，IP42
ABS+TPU/Aluminum Alloy
Possible Reasons
Scanner does not
connect properly with
power source
Low Battery
Plug of recharger is
not connected with
scanner recharging
port
Do not open the
setting identify
options of that
barcode type
14
Possible Solutions
Checkout system power
source. Check whether
scanning button has already
pressed or battery has used
up or not.
Restart after recharged
Turn the plug of recharger to
make them well connected.
Make sure the setting
identify options of the exact
barcode type has already
opened. After starting, try to