DSC Power PK5500 Installation Instructions Manual page 6

[074] Key Options
Default Option
ON 1 [F]ire Key Enabled
I____I
ON 2 [A]uxiliary Key Enabled
I____I
ON 3 [P]anic Key Enabled
I____I
OFF 4-8 For Future Use
I____I
[076] First Keypad Options
Default Option
ON 1 Display Code when Programming
I____I
ON 2 Local Clock Display ON
I____I
OFF 3 Local Clock Displays 24-hr Time
I____I
ON 4 Auto Alarm Memory Scroll Enabled
I____I
OFF I____I 5 Local Display of Temperature ON
ON 6 Bypass Options prompt ON
I____I
OFF I____I 7 For Future Use
OFF I____I 8 Auto-Scroll Open Zones ON
[077] Second Keypad Options
Default Option
ON I____I 1 Chime Enabled for Zone Openings
ON 2 Chime Enabled for Zone Closings
I____I
OFF I____I 3 5th Terminal is Keypad PGM Output
ON 4 Language Selection Enabled
I____I
OFF 5 Power LED Enabled
I____I
ON 6 Power LED indicates AC present
I____I
ON 7 Alarms always Displayed When Armed
I____I
OFF 8 Low Temperature Warning Enabled
I____I
[080] PGM Terminal 1
Default: 01
1-14 Follow PGM Output Number, 15 Local PGM Pulse , 16 Local PGM Toggle
I_______I _______I
[082] Local PGM Output Pulse Activation Time
Default: 00 Minutes (Valid Range 00-99)
I_______I _______I
Default: 05 Seconds (Valid Range 00-99)
I_______I _______I
[101]-[108] Partition Labels
ex. For Partition 1 enter section [101], for Partition 2 enter section [102] etc.
Section Partition
I _ ____I _ _ ___I _ ____I _ ___ _I _ ____I _ ____ I _ ____I _ ____I _ _ ___I _ ____I _ ___ _I _ ____I _ ____I _ ____I
[101] to [108] 1 to 8
I _ ____I _ _ ___I _ ____I _ ___ _I _ ____I _ ____ I _ ____I _ ____I _ _ ___I _ ____I _ ___ _I _ ____I _ ____I _ ____I
NOTE: Partition 1 Label is also used as the System Label
ON OFF
[F]ire Key Disabled
[A]uxiliary Key Disabled
[P]anic Key Disabled
ON OFF
Display "Xs" when Programming
Local Clock Display OFF
Local Clock Displays AM/PM
Auto Alarm Memory Scroll Disabled
Local Display of Temperature OFF
Bypass Options prompt OFF
Auto-Scroll Open Zones OFF
ON OFF
Chime Disabled for Zone Openings
Chime Disabled for Zone Closings
5th Terminal is Keypad Zone Input
Language Selection Disabled
Power LED Disabled
Power LED indicates AC absent
Alarms not Displayed When Armed
Low Temperature Warning Disabled
Label
[120]-[151] Command Output Labels
Default: "Command_O/P_1" - "Command_O/P_4"
For Partition 1 Command O/P 1 to 4 enter [120] to [123] For Partition 5 Command O/P 1 to 4 enter [136] to [139]
For Partition 2 Command O/P 1 to 4 enter [124] to [127] For Partition 6 Command O/P 1 to 4 enter [140] to [143]
For Partition 3 Command O/P 1 to 4 enter [128] to [131] For Partition 7 Command O/P 1 to 4 enter [144] to [147]
For Partition 4 Command O/P 1 to 4 enter [132] to [135] For Partition 8 Command O/P 1 to 4 enter [148] to [151]
Part Cmd.
Section
Output
I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I
[120]-[151] 1 to 8 1 to 4
I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I
[201]-[264] Door Chime Sound Programming
You can program the keypad to make up to four different door chime sounds for individual zones.
ex. For Zone 1 enter section [201], for Zone 2 enter section [202] etc.
Default Option
ON 1 6 Beeps
I____I
OFF 2 "Bing-Bing" Sound
I____I
OFF 3 "Ding-Dong" Sound
I____I
OFF 4 Alarm Tone
I____I
OFF 5-8 For Future Use
I____I
[994][,] Initiate Global Keypad Chime Broadcast
[995][,] Reset Keypad Options to Factory Default
[996][,] Label Default
[997] View Software Version
[998][,] Initiate Global Label Broadcast
[999][,] Reset Keypad EEPROM to Factory Defaults
Keypad Display Symbols
1 Ready Light (green) – If the Ready light is on, the system is ready for arming.
2 Armed Light (red) – If the Armed light is on, the system has been armed successfully.
3 System Trouble – Indicates that a system trouble is active.
4 AC – Indicates that AC is present at the main panel.
Label
ON OFF
Disabled
Disabled
Disabled
Disabled
1
2
3
4