Film-Tech SA10 Installation Manual page 25

2-2 / Alignment With CP500
To assign format 10 to softkey SK8, press the Assign
Formats key (SK1).
Menu Cancel OK Exit
FORMATS
A copy of the existing format selection screen is
displayed.
Press SK8.
SK8
A pop-up box appears, allowing any format to be
assigned to softkey 8.
Rotate the front panel knob to move the display
through the available formats.
When Format 10 is shown, select it by pressing the
OK key.
OK
Press the EXIT key to return to the Build Custom
Format menu.
EXIT
A box will appear prompting you to save or discard
the changes.
Press the OK key to save the new settings.
Note: Pressing the CANCEL key discards the new settings and
restores the old settings.
OK
Press the Formats button. This completes the
programming.
FORMATS