Advertisement
Operation
When the Sun Ray 3i Client is first plugged in, it turns on automatically. To save energy, the unit turns off
automatically when idle for 30 minutes. To turn the unit back on, touch the power button or insert a smart card.
Diagnostics
State LED Status
Off
Green
Amber
Smart Card LED Status
Off
On
Contacting Us
To find additional Sun Ray 3i Client documentation, including the latest release notes, see the Sun Ray
■
Hardware Information Center:
To submit comments or feedback about this document, leave a comment on the Information Center site.
■
To contact technical support for this product, see
■
Meaning
The unit is not plugged in or not powered on. Note: Turning the unit off or
removing a smart card does not affect the current session.
The unit is powered on and is functioning normally.
The LED lights for 2-3 seconds or less at power-on while the unit performs
diagnostic tests.
If the LED remains amber, or becomes amber at any other time, the unit is
inoperable. Contact your system administrator to replace the unit.
Meaning
No smart card is inserted or detected.
The smart card has been inserted correctly.
http://wikis.sun.com/display/sunray
http://www.sun.com/service/contacting
Advertisement
