DeLonghi Split Air Conditioner Owner's Manual page 10

Operation of wireless remote control
1. After powered on, press ON/OFF button, the unit will start to run.(Note: When
it is powered on, the guide louver of main unit will close automatically.)
2. Press MODE button, select desired running mode, or press COOL or HEAT
mode to enter into the corresponding operation directly.
3. Pressing +or - button, to set the desired temperature.
4. Press key to set the fan speed. AUTO, LOW,MEDIUM and HIGH
are available at your selection.
5. Pressing button, to select the swing.
1. Press to set the sleep mode.
2. Press , + and - key to set your expected time for auto start or
auto stop.
3. Press key to turn on or off the air conditioner display.
4. Press key. At one press of this key, the
start to blink and enter into clock adjustment status.
¡ï
About AUTO function
When AUTO mode is selected, the setting temperature will not be displayed on the
LCD, the unit automatically select the suitable running method and to make ambient
comfortable according to the room temp.
¡ï
About TURBO Function
If start this function, the unit will run at super-high fan speed to cool or heat quickly
so that the ambient temp approachs the preset temp as soon as possible.
Guide for operation- General operation
Guide for operation- Optional operation
Introduction for special function
icon will
8