Connecting And Setting The Network - Samsung SRD-830 User Manual

Connecting and Setting the Network

Networking may differ from the connection method, check your environment before setting the connection
mode.
When no router is used
• Static IP mode
- Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the
DVR and remote user.
- DVR Network Settings : Set the <Connection Mode> in
<Connection> menu of the connected DVR to <Static IP>.

Consult your network manager for IP, Gateway and Subnet Mask.
• Dynamic IP (DHCP) mode
- Internet connection : Connect the DVR directly to a cable
modem, DHCP ADSL modem or FTTH network.
- DVR Network Settings : Set the <Connection Mode> in
<Connection> menu of the connected DVR to <Dynamic
IP>.
• ADSL (PPPoE: ID and password certification)
- Internet connection : An ADSL modem is directly connected to the DVR, where the ADSL connection
requires user ID and password.
- DVR Network Settings : Set the <Connection Mode> in
<Connection> menu of the connected DVR to <ADSL>.

ADSL <User ID> and <Password> should be the same to the
ADSL user information.
If you don't know the ID and password, consult your ADSL service
provider.
Connection Mode
Connection
Protocol
 Connection Mode Static IP
 Bandwidth 2Mbps
 IP 192.168. 1.200
 Gateway 192.168. 1. 1
 Subnet Mask 255.255.255. 0
 DNS Manual 168.126. 63. 1
OK Cancel
Connection Mode
Connection
Protocol
 Connection Mode ADSL
 Bandwidth 600kbps
 IP 192.168. 1.200
 Gateway 192.168. 1. 1
 Subnet Mask 255.255.255. 0
 DNS Manual 168.126. 63. 1
 User ID ID
 Password
************
OK Cancel
English _65