Advertisement
NOTE:
If you want to modify the detailed parameters of your device, please log in
the webGUI configuration page by visiting http://192.168.0.1 or http://m.home.
The default password is admin.
AP Station Mode
1. Log in the webGUI configuration page.
2. Select Settings > AP Setting.
3. Set the WLAN and WLAN mode, and then click Apply.
NOTE:
You need to set the WLAN On and select Wi-Fi Prior.
5. After the client connected to the WLAN device successfully, you can
access the Internet.
Configuring Your PC
Follow the following steps and figures for Windows XP to configure the
Internet Protocol for your Wi-Fi connection.
1. Right-click My Network Places, and then select Properties.
4. Connect to the WLAN device.
There are two methods for your reference.
Input the WLAN device information in the WLAN Setting area, and
u
then click Apply.
Click More, select this WLAN device which will be listed, and then
u
click Connect.
9
10
2. Right-click Wireless Network Connection, and then select Properties.
4. Select Obtain an IP address automatically and Obtain DNS server
address automatically, and then click OK to finish the configuration.
3. Select Internet Protocol(TCP/IP), and then click Properties.
Warning and Notice
To the Owner
•
Some electronic devices are susceptible to electromagnetic interference
sent by your device if inadequately shielded, such as the electronic
system of vehicles. Please consult the manufacturer of your device
before using if necessary.
•
Operating your device may interfere with medical devices like hearing
aids and pacemakers. Please always keep them more than 20
centimeters away from such medical devices when they are turned
on. Turn your device off if necessary. Consult a physician or the
manufacturer of the medical device before using your device.
11
12
•
Be aware of the usage limitation when using your device at places such
Using Battery
as oil warehouses or chemical factories, where there are explosive gases
•
Do not short-circuit the battery, as this can cause excessive heat and
or explosive products being processed. Turn off your device if required.
fire.
•
The use of electronic transmitting devices is forbidden in aircrafts, at
•
Do not store battery in hot areas or dispose of it in a fire to avoid
petrol stations and in hospitals. Please observe and obey all warning
explosion.
signs and switch off your device in these conditions.
•
Do not disassemble or modify the battery.
•
Do not touch the inner antenna area if not necessary. Otherwise it will
•
When not using the battery for a long period, remove it from your device
affect your device's performance.
and store it in a cool dry place.
•
Store your device out of the reach of little children. Your device may
•
Never use any charger or battery damaged or worn out.
cause injury if used as a toy.
•
Return the wear-out battery to the provider or put it in the appointed
•
Do not touch the metallic parts of your device so as to avoid a burn,
recycle place. Do not put it in familial rubbish.
when your device is working.
WARNING:
Using Your Device
If the battery is broken, keep away from it. If it taints your skin, wash your
skin with abundant fresh water and ask doctor help if necessary.
•
Please use original accessories or accessories that are authorized. Using
any unauthorized accessories may affect your device's performance, and
Limited Warranty
violate related national regulations about telecom terminals.
•
This warranty does not apply to defects or errors in the Product caused
•
Avoid using your device near or inside metallic structures or
by:
establishments that can emit electromagnetic waves. Otherwise it may
i.
Reasonable abrasion.
influence signal reception.
ii. End User 's failure to follow ZTE's installation, operation or
•
Your device is not waterproof. Please keep it dry and store in a shady
maintenance instructions or procedures.
and cool place.
iii. End User's mishandling, misuse, negligence, or improper installation,
•
Do not use your device immediately after a sudden temperature change.
disassembly, storage, servicing or operation of the Product.
In such case, it will produce dew inside and outside your device, so don't
iv. Modifications or repairs not made by ZTE or a ZTE-certified
use it until it becomes dry.
individual.
•
Handle your device carefully. Do not drop, bend or strike it. Otherwise
v. Power failures, surges, fire, flood, accidents, actions of third parties
your device will be damaged.
or other events outside ZTE's reasonable control.
•
No dismantling by non-professionals and only qualified technicians can
vi. Usage of third-party products, or usage in conjunction with third-party
undertake repair work.
products provided that such defects are due to the combined usage.
•
Operating temperature range of 0 ºC ~ +35 ºC and humidity range of 5%
vii. Any other cause beyond the range of normal usage intended for the
~ 95% are recommended.
Product.
End User shall have no right to reject or return the Product, or receive a
refund for the Product from ZTE under the above-mentioned situations.
13
14
•
This warranty is End User's sole remedy and ZTE's sole liability for
Problem
Suggested Solution
defective or nonconforming items, and is in lieu of all other warranties,
expressed, implied or statutory, including but not limited to the implied
• Make sure your (U)SIM card is available.
warranties of merchantability and fitness for a particular purpose, unless
• Change the location to find a place with good
The client connected
otherwise required under the mandatory provisions of the law.
signal.
to the device can not
• Check WAN Connection mode setting.
Limitation of Liability
access the Internet.
• Contact with your service provider and confirm
ZTE shall not be liable for any loss of profits or indirect, special, incidental or
your APN settings.
consequential damages resulting from or arising out of or in connection with
• Make sure the other WLAN device has
using of this product, whether or not ZTE had been advised, knew or should
When I use AP Station
already connected to the Internet.
have known of the possibility of such damages, including, but not limited to
mode, the client cannot
• Make sure that the subnet of your device and
lost profits, interruption of business, cost of capital, cost of substitute facilities
access the Internet.
the other WLAN device is different
or product, or any downtime cost.
• Enter the correct address. The default address
Troubleshooting
Can not visit the
is http://192.168.0.1 or http://m.home.
webGUI configuration
• Only use one network adapter in your PC.
Problem
Suggested Solution
page.
• Do not use any proxy server.
• You need to install the software. Run the
• For the Wi-Fi connection password, please
Can not establish
installation program in path of My Computer
check the label on the device.
the USB connection
> ZTEMODEM.
• The default password of the webGUI
between your device
• If the driver of your device is abnormal, please
About the password
configuration page is admin.
and PC.
reinstall the software. You need to uninstall
• If you changed the password and forgot the
the software first.
new password, you need to restore the device
• Make sure the Wi-Fi function is active.
to the factory default settings.
• Refresh network list and select the correct
For more assistance, please:
Can not establish
SSID.
•
Send E-mail to mobile@zte.com.cn
the Wi-Fi connection
• Check the IP address to make sure your client
•
Visit http://www.zte.com.cn
between your device
can obtain an IP address automatically in the
•
Call Service Hotline: +86–755–26779999
and client.
Internet protocol (TCP/IP) properties.
• Type the correct network key (Wi-Fi password)
when you connect to the device.
15
16
Advertisement
