ZTE MF90 Let’s go Getting started with your device. ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Confidential and Proprietary Information of ZTE CORPORATION 1...
Page 2
ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.0 Edition Time : 4.18.2013...
Blue solid Registered to the 4G network. Blue blinking Connected to the 4G network and data is being transferred. Blue solid WPS is active. Wi-Fi Blue blinking Wi-Fi is active. Confidential and Proprietary Information of ZTE CORPORATION 3...
Page 4
Internet Wi-Fi Mode: Your device will connect to other WLAN device (hotspot device, wireless router, etc.) via Wi-Fi to access the Internet. The WLAN device has already connected to the Internet. 4 Confidential and Proprietary Information of ZTE CORPORATION...
2. Insert the (U)SIM card. IMPORTANT: Your device does not support Micro/Nano or any other nonstandard SIM cards. To avoid device damage, please do not use them. 3. Insert the microSD card if necessary. Confidential and Proprietary Information of ZTE CORPORATION 5...
2. Use your normal Wi-Fi application on the client to search for the available wireless networks. NOTE: Please set the client to obtain an IP address automatically referring to the chapter “Configuring your PC”, and then the client will get an IP address like “192.168.0.101”. 6 Confidential and Proprietary Information of ZTE CORPORATION...
You may need to input the password for Wi-Fi connection. Please c the default. 5. Wait a moment, and then the client will connect to your device successfully. Via USB Cable 1. Connect to the device. Confidential and Proprietary Information of ZTE CORPORATION 7...
. The default password is admin. Internet Wi-Fi Mode 1. Log in the 4G Mobile Hotspot page. Select Settings > Internet Wi-Fi. , and then click Apply. Enable the Internet Wi-Fi Switch 8 Confidential and Proprietary Information of ZTE CORPORATION...
Follow the following steps and figures for Windows XP to configure the Internet Protocol for your Wi-Fi connection. 1. Right-click My Network Places, and then select Properties. 2. Right-click Wireless Network Connection, and then select Properties. Confidential and Proprietary Information of ZTE CORPORATION 9...
Page 10
ZTE MF90 Getting Started 3. Select Internet Protocol(TCP/IP), and then click Properties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click OK to finish the configuration. 10 Confidential and Proprietary Information of ZTE CORPORATION...
Never use any charger or battery damaged or worn out. • Return the wear-out battery to the provider or put it in the appointed recycle place. Do not put it in • familial rubbish. Confidential and Proprietary Information of ZTE CORPORATION 11...
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.
The default password of the 4G Mobile Hotspot page is admin. If you changed the password and forgot the new password, you need to restore the device to the factory default settings. Confidential and Proprietary Information of ZTE CORPORATION 13...
The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. 14 Confidential and Proprietary Information of ZTE CORPORATION...
Page 15
To support body operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this and your body. Confidential and Proprietary Information of ZTE CORPORATION 15...