Power With Gas; Switching Off The Refrigerator; Securing Products For Driving - Bailey Caravan Owner's Manual

Open the valve of the gas bottle and the gas taps. Set the gas control button to the maximum position.
Set the energy source selector switch (A) to ignite the gas flame.

4.11.4 Power with gas

1 Open the valve of the gas bottle and the gas taps.
2 Set the thermostat button (B) to the maximum position.
3 Set the energy source selector switch (A) to
4 Press the gas control button, rotary switch (B), and keep it depressed.
5 Depress the piezo ignition button so that it clicks. This produces a spark to ignite the gas burner. Do
this continually until the flame meter turns green and then release the gas control button.
6 If the flame goes out wait for 2 minutes then repeat step 5 again.
7 Set the desired refrigeration level by means of the gas control button, rotary switch (C). Position 5 is
the coldest setting.

4.11.5 Switching off the refrigerator

1. Set the energy source selector switch (A) to
2. The refrigerator is now completely switched off.
3. Use the door locking mechanism to lock the open door. This prevents unpleasant odours and mould
in the refrigerator.
▲ If you are not going to use the refrigerator for a prolonged period, close the valve of the
gas bottle and the gas taps.

4.11.6 Securing products for driving

One of the racks in your refrigerator has a system for securing products during
driving. The system consists of a simple click-and-slide plastic strip. To secure
products on the rack while driving, push the plastic strip as tightly as you can
against the products on the rack.
In the storage space on the inside of the refrigerator door, there is the unique
Thetford flexible bottle slide. The slide prevents bottles from sliding around
during driving. Push the slide against the products in the door or place the
products between the bottle slide.
Caravan Equipment
4
4-29