Bailey Caravan Owner's Manual page 62

3. Set energy selector switch (A) to Gas.
4. Press and hold rotary switch (B).
5. Activate ignition by pressing the button (C) and keep it depressed.
6. Check the inspection glass to see whether there is a flame (the inspection glass is inside the
refrigerator at the bottom left).
7. Release igniter button (C). Keep rotary switch (B) depressed for another 10-15 seconds, then
release.
8. Check the inspection glass to see whether a flame is burning.
9. Repeat the entire process if the flame has gone out.
10. Use rotary switch (B) to regulate the temperature in the main refrigerator compartment.
▲ All refrigerators, whether manual or automatic, are equipped with automatic flame
protection, which automatically cuts off the supply of gas approximately 30 seconds after
the flame goes out.
▲ When using for the first time, and after changing the gas cylinder, the gas pipes may
contain air. By means of brief operation of the refrigerator and any other gas appliances
(e.g. cookers), air is removed from the gas pipes. The gas will then ignite without delay.
Caravan Equipment
Inspection
glass
4
4-19