ProScan Owner's Manual page 6

R i g h t P a g e T e x t
You can also add and delete channels from memory as
2
desired. Press repeatedly to select the
MENU
, then press + to display the setup functions. Press
MENU
repeatedly to select the
MENU
select the desired channel number and press + to add or
– to erase the channel . Details are on page 15.
Mute
Video Menu
Audio Menu
Setup Menu
8 Adjust picture tilt switches if necessary.
Some TV models have an extra large
color picture tube. The effects of
geomagnetism (Earth's magnetic
field) may cause the picture to tilt
slightly. The and
POLARITY
switches on the back of the TV let
you compensate for this effect. If
the picture appears tilted, follow
these steps to improve it.
• Make sure the
STRENGTH
the diagram shows.
• Move the switch to the
STRENGTH
improves the tilt but it is still not satisfactory, move the
switch to the
STRENGTH HIGH
the situation. If moving the
tilt worse, go to the next step.
• Change the position of the
improves the tilt but it is still not satisfactory, move the
switch to the
STRENGTH HIGH
the situation.
You may need to reset the
if the TV is moved or repositioned in the room, especially
if the TV will be facing a different direction.
9 Set the clock.
1 Repeatedly press the
MENU
and then press +. Press
MENU
select the display.
CLOCK SET
Mute
Video Menu
Audio Menu
Setup Menu
SETUP
function, then
CHAN MEM
Chan Label
Parental Ctrl: Off
Chan Ctrl: Normal
Autoprogram
Chan Mem: Stored
+
HIGH
LOW
–
OFF
POLARITY STRENGTH
STRENGTH
PURITY
CORRECTION
switch is in the position as
OFF
position. If this
LOW
position. This should correct
switch makes the
STRENGTH
switch. If this
POLARITY
position. This should correct
and switches
POLARITY STRENGTH
button to select the
SETUP
repeatedly again to
MENU
Cable/Air: Cable
VCR 1 Chan: Off
VCR 2 Chan: Off
Cable Chan: Off
Clock Set –Hr +Min
2 Press and hold the – button to select the correct hour.
Then press and hold the + button to select the correct
minute.
3 The correct time will now appear on the screen
whenever you change channels or press the
button.
Note: If power is interrupted for an extended time, you will need
to reset the clock.
10 Review menus.
To see the video menu, repeatedly press
1
select and then press +. Repeatedly press
VIDEO MENU
to select desired function and then press + or – to
MENU
adjust it. Details are on page 15.
2 To see the audio menu repeatedly press
the and then press +. Repeatedly press
AUDIO MENU
to select desired function and then press + or – to adjust
it. Details begin on page 14.
3 To see the setup menu,
repeatedly press to
MENU
select and then
SETUP MENU
press +. Repeatedly press
to select desired
MENU
function and then press + or
– to adjust it. Details begin
on page 15.
Mute
Video Menu
Audio Menu
Setup Menu
11 Label channels if desired.
The labeling feature lets you add names (or labels) to
channels as desired.
To label a channel, repeatedly press
1
and then press +. Repeatedly press
SETUP MENU
select the display, and then press + to enter
CHAN LABEL
the function.
Mute
Video Menu
Audio Menu
Setup Menu
Select the channel
2
number you want to label. Repeatedly press
down on the remote control to select the desired
character, and then press + to move to the next character
block. When the first name is finished, you can select
DISPLAY
button to
MENU
to select
MENU
MENU
Captioning: Off
Sleep Timer 0:00
Set Alarm
Chan Label
Parental Ctrl: Off
Chan Ctrl: Normal
Autoprogram
Chan Mem: Stored
Antenna: A
Cable/Air: Cable
VCR 1 Chan: Off
VCR 2 Chan: Off
Cable Chan: Off
Clock Set –Hr +Min
to select the
MENU
to
MENU
Captioning: Off
Sleep Timer 0:00
Set Alarm
Chan Label
Parental Ctrl: Off
up or
VOL
3