ProScan Owner's Manual page 25

S e t u p M e n u :
Erasing/Adding Channels in Channel Memory
with or without remote
1 Repeatedly press the
MENU
then press + to display the setup functions.
Mute
Video Menu
Audio Menu
Setup Menu
2 Repeatedly press the
MENU
10:48 12
Parental Ctrl: Off
Chan Ctrl: Normal
Autoprogram
Chan Mem: Stored
Antenna: A
3 To erase a channel, first press the
until the channel number you want to erase appears on the
screen. Then press –.
To add a channel, first enter two number buttons for the
channel you want to add. For example, press "0" then "6" for
Channel 6. (If the remote is not handy, you can press the
up or down button on the TV to select the channel
CHANNEL
you want to add). Then press +.
4 Repeat step 3 for each channel you want to erase or add.
Note: The menu will automatically disappear from the screen a few
seconds after you have finished erasing or adding channels. You can
make it disappear more quickly by pressing the
remote control.
22
B a s i c F u n c t i o n s c o n t i n u e d
button to select and
SETUP MENU
button until is selected.
CHAN MEM
10:48 12
Parental Ctrl: Off
Chan Ctrl: Normal
Autoprogram
Chan Mem: Erased
Antenna: A
up or down button
CHANNEL
button on the
CLEAR
Adding Video Input Channels to Channel
Memory
with or without remote
As an added convenience, you can also add video input
channels (90, 91, and 92) to memory. If you have a video
device such as a VCR, camcorder, laserdisc player, etc.)
connected to the - or
S VIDEO INPUT
you can view its signal either by directly selecting Channel 90
(for connector), Channel 91 (for
S-VIDEO
92 (for ) with the number buttons or by adding those
INPUT 2
channels to the Channel Memory.
Adding Channels 90, 91, and 92 to the Channel Memory
allows access to the video inputs at the TV by pressing
the up or down buttons as well as by using the
CHANNEL
remote control.
jacks on the back of the TV,
), or Channel
INPUT 1