Troubleshooting - Ortech TR-100 User Manual

Troubleshooting

WARNING!
Digital Control
Display is Blank
Always disconnect the grill from AC power before
accessing the control for service or working under
the grill.
Removing the control from the grill, installing the
control into the grill, or working under the grill while
the grill is connected to AC power could result in
shock or damage the control.
Cook Control switch is set to the Off position.
Set Cook Control switch to the Smoke position or any
temperature setting.
Circuit breaker on AC outlet is tripped.
Reset wall power outlet circuit breaker.
Control is disconnected from grill AC power.
Verify control wiring harness plug with black wire is
connected to AC power.
AC Power Plug
22