Cooking - Ortech TR-100 User Manual

Cooking

Cook Control
Cook Sequence
Temperature
Settings
High Temperature
Setting
On Fuel Feed Rate
Set the Cook Control switch to the desired temperature. The
control displays the grill's current temperature.
Once the ignition sequence is complete and the igniter turns
off, the auger feeds fuel into the fire pot to maintain the set
temperature.
180 180 degrees
225 225 degrees
250 250 degrees
275 275 degrees
300 300 degrees
325 325 degrees
350 350 degrees
375 375 degrees
High 450 degrees or Maximum Temperature
If the Cook Control switch is set to High, the grill operates at
450 degrees. If the grill is unable to attain 450 degrees due
to ambient temperature and humidity, fuel type and quality,
and/or thermal characteristics of the grill, the auger feeds
fuel continuously allowing the grill to operate at its Maximum
Temperature.
The On Fuel Feed Rate is the rate the auger delivers fuel
while the grill is below the set temperature. In Cook Mode,
the On Fuel Feed Rate is designed to drive the grill's
temperature upward to the set temperature and limit
temperature overshoot. The On Fuel Feed Rates are
preprogrammed into the control and are not adjustable.
Temperature
Setting On Fuel Feed Rate
180 Auger on for 15 seconds, off for 15 seconds
225 Auger always on
250 Auger always on
275 Auger always on
300 Auger always on
325 Auger always on
350 Auger always on
375 Auger always on
High Auger always on
13