Smoking - Ortech TR-100 User Manual

Smoking

Smoke Control
Smoke Sequence
Smoke Setting
Low Temperature
High Temperature
Limit Error (ErH)
Set the Cook Control switch to Smoke. Use the Smoke
Control switch to manually select the auger fuel feed rate.
The control displays the grill's current temperature.
Once the ignition sequence is complete and the igniter turns
off, the auger delivers fuel at a constant rate determined by
the smoke setting (P0 - P15).
The smoke fuel feed rate is the rate the auger delivers fuel
while the grill is operating in Smoke Mode. In Smoke Mode,
manually adjust the fuel feed rate using the Smoke Control
switch to establish the desired temperature and/or smoke
output. See "Understanding Idle Fuel Feed Rate and Smoke
Settings" for more information.
If the grill temperature is less than 110 degrees, the
displayed temperature flashes, indicating a low temperature.
This is not an error condition and does not affect the
operation of the grill. The flashing display is designed to
alert the operator that there is some risk of the fire going
out.
If the grill temperature is greater than 615 degrees, a
flashing "ErH" is displayed indicating a high limit error and
the grill shuts down. Refer to the "Error Modes and
Messages" section for details.
15