Setting Area Code Predialling - Siemens Gigaset C470 IP Manual

Web configurator – configuring the telephone via a PC

Setting area code predialling

Automatic Refer To
If you activate Yes, the base station will attempt to determine the best protocol automat-
ically.
If the base station cannot determine the best protocol, it will use the protocol defined
in
Preferred Refer
¤
Now click to save your settings.
Set
Setting area code predialling
On the base station, save the complete code (with international code) for the area in which
you are using the phone.
For VoIP calls you must generally always dial the area code – even for local calls. You can
save the need to dial the area code for local calls by setting your phone to prefix this code
for all VoIP calls made in the same local area.
For calls made via VoIP, the area code entered is then prefixed to all numbers that do not
start with 0 – even when dialling numbers from the directory and other lists. Exceptions:
Numbers for which you have defined dialling plans (page 137).
¤
Open the following Web page:
Configure the following settings in the
¤
From the Country
the country code and the prefix of the area code are automatically set (in
/
Prefix Area Code
¤
In the
Local Area Code
(for London).
¤
Click Yes next to
Click No to deactivate the function. You will then need to enter the area code for local
calls made via VoIP. Numbers in the directory must always contain the area code for dial-
ling via VoIP.
¤
Click Set to save the settings.
Please note:
u
The area code will also be prefixed to VoIP calls made to emergency numbers if there
are no defined dialling plans for these numbers.
u
The numbers of your network mailbox saved in the base station are not prefixed with
a code (page 139).
136
To.
Settings
list, select the country in which you are using your phone. This way
and fields).
Local Prefix
field enter the area code for your town without a prefix, e.g. 20
Predial area code for local calls through VoIP
¢ ¢
Telephony
area:
Area Codes
Dialling Plans.
International
to activate the function.