Opening Lists With The Message Key - Siemens Gigaset C470 IP Manual

Using the directory and lists

Opening lists with the message key

Opening lists with the message key
You can use the message key f to open the following lists:
u
Network mailbox, see page 87
A separate list is displayed for each network mailbox.
Precondition: Its number is saved in the base station, it is switched on (page 85/
page 139) and the corresponding VoIP/fixed line network number is assigned to the
handset as a receive number
u
SMS list, see page 64
If several mailboxes are set up (page 67), several lists will be displayed, if required.
u
Incoming e-mail list, see page 72
The list is only shown if new messages have arrived in the mailbox from the incoming
e-mail server.
u
Calls list
u
Messenger message list, see page 81
The list is only shown on the handset that is online.
An advisory tone sounds as soon as a new message arrives in a list. The f key flashes
(it goes off when the key is pressed). In idle status, the display shows an icon for the new
message:
Icon New message...
Ã
... to one of your network mailboxes
Á
... in calls list
À
... in the SMS, messenger or e-mail list
The number of new entries is shown beneath the corresponding icon.
List selection
Pressing the f button will only display lists that contain messages and also the network
mailbox lists Net AM:
Lists with new messages are shown first and identified in bold. The number of messages
received are shown in brackets.
If a list contains no new messages, the number of old messages will be shown. Exception:
(0) is displayed for
Example:
Messages & Calls
Calls List:
Net AM: IP1
Net AM: Fxd. line (0)
Net AM: IP2
Ý
56
....
Net AM: ... network mailboxes.
(2)
(4)
(0)
OK