Setting Your Own Area Code; Restoring The Handset To The Factory Settings; Base Station Settings; Protecting Against Unauthorised Access - Siemens Gigaset S670 User Manual

Base station settings

Setting your own area code

In order to transfer phone numbers
(for example vCard), it is essential that
your area code (international and local
area code) is saved on the phone.
Some of these numbers are already pre-
set.
¢ ¢
v Ð
Handset
Check that the (pre)set area code is cor-
rect.
¤
Change multiple line input:
q
Select/change input field.
r
Navigate in the input field.
X
If necessary, delete number:
press the display key.
~
Enter number.
Press the display key.
§Save§
Example:
Area Codes
International code:
00 - 49
Local area code:
0 - [ 89 ]
X
Save
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. Entries in
the directory, the call-by-call list, the call
history, the SMS lists and the handset's
registration to the base station as well as
the content of My stuff are retained.
¢ ¢
v Ð
Handset
Press the display key.
§Yes§
a
Press and hold (idle status).
54
¢
Area Codes
¢
Reset Handset
Base station settings
The base station settings are carried out
using a registered Gigaset S67H handset.
Protecting against unauthorised
access
Protect the system settings of the base
station with a PIN known only by you.
The system PIN must be entered when,
for example, registering/deregistering a
handset to/from the base station or when
restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only by you.
Gigaset S675: Setting a system PIN facili-
tates remote operation of the answer
machine (page 40).
¢ ¢ ¢
v Ð
Base
~
Enter the current system PIN
and press
~
Enter new system PIN. For
security the PIN is shown as
four stars ( **** ).
s ~
Jump to the next line, re-enter
new system PIN and press
a
Press and hold (idle status).
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the registration/pag-
ing key on the base station while recon-
necting the power cable to the base sta-
tion. Release the key after a while.
System PIN
.
§OK§
§OK§
.