Setting The Alarm Clock - Siemens Gigaset C470 IP Manual

Battery:
Select On, Off or
sounds during a call.
Press the display key to save the setting.
§Save§
You cannot deactivate the confirmation tone for placing the handset in the charging cra-
dle.
Please note:
You can also adjust the ringer tones via Ð

Setting the alarm clock

Precondition: The date and time have already been set (page 14).
Activating/deactivating the alarm clock and setting the wake-up time
¢
v ì
Alarm Clock
¤
Change multiple line input:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
Melody:
Select melody.
Volume:
Set the volume (1–6).
Press the display key to save the setting.
§Save§
The ì icon is displayed in the idle display.
A wake-up call with the selected ringer melody is signalled on the handset. The wake-up
call sounds for 60 seconds. ì is shown in the display. If no key is pressed, the wake-up call
is repeated twice at five minute intervals and then turned off.
During a call, the wake-up call is signalled by a short tone.
Deactivating the wake-up call/repeating after a pause (snooze mode)
Precondition: A wake-up call is sounding.
Press the display key. The wake-up call is deactivated.
§OFF§
Or
Press the display key or any key. The wake-up call is deactivated and then
§Snooze§
repeated after 5 minutes. After the second repetition the wake-up call is deac-
tivated completely.
In Call. The battery warning tone is only activated/deactivated and only
£
Settings Audio Settings
Handset settings
Setting the alarm clock
£
Advisory Tones in the menu.
101