Table of Contents
Advertisement
72 Microsoft Broadband Networking Base Station User's Guide
To enable client filtering
1. Open the Base Station Management Tool, and then click
Security.
2. On the Security menu, click Client Filtering.
3. In the appropriate box, type the IP address of the client device
whose access to the Internet you want to control.
4. In the Outbound port(s) boxes, type the outbound port protocol
and port number for the data that you want to control.
5. In the appropriate boxes, specify the date and time range when
you want to block access to this data. If you want to filter access
on a particular day, for example, every Sunday, enter the same
time and the same date for the start and end period. If you want
to block access all the time, click Always.
6. Select the Block check box, and then click Apply to apply the
client filtering.
Base Station Log
You can access the base station log for your network from the
Security section of the Base Station Management Tool. This log
records general base station activity and time stamps each log file
entry. If you have any concerns about unusual activity on your
network, review the base station log.
The base station log can maintain up to 256 lines of data. When
the base station log reaches maximum capacity, the base station
deletes the oldest log entries.
To view the base station log
1. Open the Base Station Management Tool, and then click
Security.
2. On the Security menu, click Base Station Log.
Advertisement
Table of Contents
