Configuring The Base Station - Microsoft MN-500 User Manual

Wireless base station
Hide thumbs Also See for MN-500:
Table of Contents

Advertisement

44 Microsoft Broadband Networking Base Station User's Guide
continued
Menu item
Tasks
Security
Configure a variety of specialized security functions,
including:
• Firewall
• Wireless security (WEP)
• Port forwarding, including virtual servers and special
• Client filtering
• MAC filtering
You can also view the base station log from the Security section.
For more information, see "Security Settings" in this chapter.
If you need help at any time, click the Help button available on
each page of the Base Station Management Tool.

Configuring the Base Station

Typically, when you run the Setup Wizard, you establish the settings
required for your base station to connect to the Internet. If you
completed the Setup Wizard, you only need to use the Base Station
Management Tool when you want to modify your network settings.
You must use the Base Station Management Tool to establish the
initial settings if any of the following are true:
• You did not run the Setup Wizard when you connected your
network hardware and installed the network software.
• You are trying to configure the base station from a computer
running Microsoft Windows
running Windows (for example, a Macintosh).
• You want to set the base station to bridging mode to extend the
capabilities of an existing network.
If any of these situations apply to you, you must initially configure
the base station from the Base Station Management Tool.
To configure the base station from the Base Station
Management Tool
1. Connect the base station to a computer. For information about
how to do this, see Chapter 3.
2. Configure the TCP/IP properties of each computer that you want
to connect to your network. For information about how to do
this, see "Configuring Network Computers" in this chapter.
3. On the computer connected to the base station, open your Web
browser, and then type 192.168.2.1 in the address field.
4. In the logon box, type your password. The default password is
admin.
applications
®
2000 or from a computer not

Advertisement

Table of Contents
loading

Table of Contents