Direction Settings - Binding Position; Despeckle - Konica Minolta bizhub C203 Operation Manual
Box operation
Hide thumbs
Also See for bizhub C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
6
Direction Settings - Binding Position
%
Select the binding position, such as when holes are punched in the document or the document is
stapled.
–
This adjusts the scan of double-sided documents so that the binding position is not reversed.
Item
Auto
Top
Left
Despeckle
%
Select this setting to reduce the effect that dust on the left partition glass has on images when the
document is loaded into the ADF.
!
Detail
The scanning speed will be reduced if the "Despeckle" setting is selected.
Clean the left partition glass when it becomes extremely dirty. For details, refer to the User manual –
Copy Operations.
6-18
Description
The binding is on the long side if the page is 297 mm or less, or it is on the short side if the page is
more than 297 mm.
Select this setting if the original that is loaded has a binding margin at the top.
Select this setting if the original that is loaded has a binding margin at the left.
Save Document
bizhub C353/C253/C203 (FE2)
Advertisement
Table of Contents
