Time Functions - NIXON THE DELTA II Operation Manual

2

TIME FUNCTIONS

ROTATE the DIRECT DIAL arrow to point to TIME: (2A)
In the TIME WORLD the MODEs are:
• Time 1/T2
• Countdown Timer (TMR)
• Chrono (CHR)
• Alarm (AL)
Default Screen will be Time 1
PRESS MODE to scroll through the MODEs.
SETTING THE TIME:
PRESS MODE until Time is the active screen.
PRESS and HOLD MODE for 3 seconds to enter Setting.
The Hours will start to blink.
The setting sequence is the following: Hour, Minutes,
Seconds, Year, Month, Date, Time Format (12 or 24 Hour),
DST, Units (FT or Meters), and Contrast.
The Units setting will be used later in RIDE and SPEED
worlds.
PRESS the MODE button again to advance
to the next setting field.
PRESS the START/STOP button to increase the value
of the blinking field.
PRESS the LAP/RESET button to decrease the value
blinking field.
PRESSing MODE again after Contrast
will take the watch out of Setting.
9