Advertisement
DIGITAL | DOT MATRIX DISPLAY | |
NORMAL TIME | (TIME & DATE ONLY SHOWING) | |
TIDE | ![]() | |
COUNT DOWN TIMER | ![]() | |
CHRONOGRAPH | ![]() | |
DUAL TIME | ![]() | |
ALARM | ![]() | |
SLEEP | SLP |
In any digital mode you can press and hold LIGHT/RESET for 2 SECONDS and you will automatically enter SLEEP mode, the digital display is gone, but not forgotten. If the stopwatch or count-down timer or alarm is activated, it will continue to operate during the sleep mode. To exit the sleep mode, press and hold LIGHT/RESET for 2 SECONDS and you're back live.
FIG. 1
PULL crown to position 2.
TURN the crown either direction to the correct time.
PUSH crown to position 1 (all the way in).
NEVER PUSH THE LIGHT BUTTON WHEN YOUR WATCH IS SUBMERGED. EVER.
PUSH and HOLD the SET BUTTON for 2 SECONDS
NOTE: The DAY will blink.
PUSH the STRT/STP button to scroll to the right day.
PUSH the MODE button.
NOTE: The MINUTES will blink.
PUSH the STRT/STP button to get to the right minute.
PUSH the MODE button.
NOTE: The HOURS will blink.
YOU KNOW the drill by now: follow the same trick to set the DAY, MONTH, and YEAR.
NOTE: Press STRT/STP to switch to 24 hour display
NOTE: Press Set to switch from DAY to SECOND display
PRESS and HOLD for 2 SECONDS the SET button.
NOTE: The Minutes of the LOCAL BEACH HIGH TIDE will blink.
PRESS the STRT/STP button to get to the right MINUTE
PRESS the MODE button
NOTE: The HOURS of the LOCAL BEACH HIGH TIDE will blink.
PRESS the STRT/STP button to get to the right HOUR
PRESS the MODE button.
NOTE: the MINUTES of BEACH 1 HIGH TIDE will blink.
PRESS the STRT/STP button to get to the right MINUTE
PRESS the MODE BUTTON
NOTE: The HOURS of the BEACH 1 HIGH TIDE will blink.
PRESS the STRT/STP button to get to the right HOUR.
REPEAT for BEACH 2
PRESS SET button at any time to exit the tide setting mode.
PRESS STRT/STP to switch to BEACH 1 in normal LOCAL TIDE MODE
PRESS STRT/STP to switch to BEACH 2 in BEACH 1 TIDE MODE
PRESS STRT/STP to switch to LOCAL in BEACH 2 TIDE MODE
PRESS SET to switch between normal time display and TIDE COUNTDOWN TIME in any BEACH mode (Local, Beach 1, or Beach 2)
The MOON phase is already programmed and will accurately tell you the moon phase until you are old and gray. The TIDE should be adjusted every few weeks to ensure accuracy. If the moon phase or tide isn't showing accurate information, double check that you've set the Super Hero date correctly.
NOTE: The Super Hero Countdown Timer is initially set at a 20 min. countdown. This is the length of a normal heat, but you can set the Countdown Timer to any time 20 HOURS or lower. If you're doing anything for longer than 20 HOURS in a row, something is wrong.
PUSH STRT/STP to start counting down.
PUSH STRT/STP to pause or stop counting down.
PUSH LIGHT/RESET to reset the counter.
PUSH and HOLD for 2 SECONDS the SET button.
NOTE: The SECONDS will flash.
PUSH STRT/STP BUTTON to get to the right second.
PUSH MODE button.
NOTE: The MINUTES will flash.
PUSH STRT/STP BUTTON to get to the right minute.
PUSH MODE button
NOTE: The HOURS will flash.
PUSH STRT/STP BUTTON to get to the right hour.
HINT: Hold the button down to make the numbers go faster.
THREE MINUTES before time-zero you will hear ONE beep sound. ONE MINUTE before time-zero you will hear THREE beep sounds. At TIME-ZERO the beeping will continue for 15 seconds.
PRESS any button to turn off the beeping.
PUSH STRT/STP to start.
PUSH STRT/STP to stop.
PUSH LIGHT/RESET to reset
PUSH SET button while CHRONO is running (SPLIT word will appear)
PUSH STRT/STP to stop CHRONO
PUSH SET to recall SPLIT Time
PUSH LIGHT/RESET to reset.
PUSH and HOLD for 2 SECONDS the SET Button.
NOTE: The DAY will blink.
PUSH STRT/STP to select the correct DAY.
PUSH MODE button.
NOTE: The MINUTES will blink.
PUSH STRT/STP to select the correct MINUTE.
PUSH MODE button.
NOTE: The HOURS will blink.
PUSH STRT/STP to select the correct HOUR.
PUSH MODE to leave SET DUAL TIME MODE.
PUSH and HOLD for 2 SECONDS the SET button.
NOTE: The MINUTES will blink.
PUSH STRT/STP to select the correct MINUTES.
PUSH MODE button.
NOTE: The HOURS will blink.
PUSH STRT/STP to select the correct HOUR.
PUSH SET to exit SET ALARM MODE.
In ALARM MODE (AL) push the LIGHT button to turn alarm on/off.
In ALARM MODE (AL) push the STRT/STP button to turn chime on/off.
PUSH LIGHT/RESET to enter SNOOZE MODE.
PUSH ANY OTHER BUTTON to turn off the alarm.
NOTE: The snooze is a ten minute snooze and will repeat six times. Anything after that, you're on your own.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the THE SUPERHERO and is the answer not in the manual?
Questions and answers