NIXON REGULUS-MK1 - 44.5mm 10ATM Watch Manual

FEATURES

Custom LCD digital module featuring time of day (12 hour or 24 hour), day/date, auto calendar through 2099, dual chronographs with 1/100 second resolution visible in all modes, 3 alarms, adjustable LED backlight, and silent mode.

Press PUSHER C to advance through the modes in the following sequence:
HOME SCREEN: TIME, CHRONOGRAPH, ALARM

TIME MODE

TIME MODE FEATURES

• hours, minutes and seconds display in 12 or 24 hour format
• day and date display
• dual chronographs

TIME / DATE:

• Press and hold PUSHER C: LED backlight duration time will begin to blink
• Press PUSHER A to increment the value & PUSHER B to decrement the value
• Press PUSHER C to scroll through all the settable values in the following order:
  backlight duration, year, month, day, 12 / 24 hr, seconds, hours, minutes
• Press and hold PUSHER C to confirm and exit setting state (will time out after 30 sec)

CHRONOGRAPHS:

• Press PUSHER A to start / stop Chronograph 1; when stopped press and hold to reset
• Press PUSHER B to start / stop Chronograph 2; when stopped press and hold to reset

LIGHT:

• Press and hold PUSHER D to enter brightness setting
• Press PUSHER D to scroll through brightness in the following order:
  off, level 1, level 2, level 3
• Press and hold PUSHER D to exit setting state (will time out after 5 sec)

SILENT:

• Press and hold PUSHERS C & D to toggle SILENT mode on / off
• In SILENT mode, ALARMS will not sound

* LIGHT & SILENT settings can be updated from any mode

• Press PUSHER C to advance to CHRONOGRAPH MODE

CHRONOGRAPH MODE

CHRONOGRAPH MODE FEATURES

• dual chronographs with hundredth seconds resolution
• time, day, and date display

CHRONOGRAPHS:

• Press PUSHER A to start / stop Chronograph 1; when stopped press and hold to reset
• Press PUSHER B to start / stop Chronograph 2; when stopped press and hold to reset
• Press PUSHER C to advance to ALARM MODE

ALARM MODE

ALARM MODE FEATURES

• three customizable alarms

ALARMS:

• Press PUSHER A to toggle on / off the alarm that is currently displayed
  NIXON icon logo in lower right indicates alarm is ON
• Press PUSHER B to scroll through the three alarms
• Press and hold PUSHER C to enter alarm setting state, hours will begin to blink
• Press PUSHER A to increment the value & PUSHER B to decrement the value
• Press PUSHER C to toggle between setting hours and minutes
• Press and hold PUSHER C to confirm and exit setting state (will time out after 30 sec)
• Press PUSHER C to return to TIME MODE

WATER RESISTANCY RATINGS AND WATCH CARE

*RINSE WATCH WITH SOAP AND WATER AFTER EXPOSURE TO SALT WATER OR SAND.

Replace the battery at least every two years. Dead or low batteries left in a watch may leak and destroy the movement of your watch. If you have a water resistant watch, know that the water resistancy is attained using rubber or plastic seals which will deteriorate under normal conditions and reduce the water resistancy of your watch. These seals should be checked by an authorized jeweler at least every two years to ensure the rated water resistancy. Do not expose your watch to extreme temperatures (over 60ºC or 140ºF, under -10ºC or 14ºF). No hot tubs or saunas. Sorry, but do you really need to know the time when you're tubbing?

Avoid extreme shocks.

www.nixon.com