NIXON THE SUPER UNIT - Watch Manual

WELCOME

You just bought a NIXON watch. How about that. Welcome to the NIXON side, a side that's about custom-built product, quality, and durability.
We're stoked you selected one of our watches. The fact that you bought a NIXON means you can probably tell time, but you may not be familiar with all the doodads and features of our watches. So if you're stuck, read through these instructions. Or get your friends to read them and then they can tell you what's up.

FEATURES

Custom LCD digital module encased in a protective Poron housing for super tough shock absorption and durability. Functions include dual time, time of day (12 hour or 24 hour), day/date, auto calendar through 2104, chronograph with 1/100 second resolution and lap counter up to 99 laps, moon phase calendar, and 10 year battery life.
Press PUSHER B to advance through the modes in the following sequence:
HOME SCREEN: TIME, ALARM, CHRONOGRAPH, TIMER

TIME MODE

TIME MODE features

• hours, minutes and seconds display in 12 or 24 hour format
• day, date and month display
• dual time zones, TIME ZONE 1 and TIME ZONE 2
• moon phase

To set the primary time zone (T1) navigate to Time Mode:

• Press and hold PUSHER B to enter Time Mode setting state (hours will begin to blink)
• Press PUSHER C to increment the value
• Press and hold PUSHER C to quickly increment the value
• Press PUSHER D to decrement the value -Press and hold PUSHER D to quickly decrement the value
• Press PUSHER B to advance from hours to minutes, seconds, year, month, date, 12/24hr, keytone / hourly chime (on or off), and hemisphere (Northern or Southern)
• Press and hold PUSHER B to confirm and exit setting state
  To toggle between TIME ZONE 1 and TIME ZONE 2, press PUSHER C. To switch from one to the other, press and hold PUSHER C. Time Mode setting state will only affect current time zone. To set your other time zone, switch to the desired zone, and press and hold PUSHER B to enter Time Mode setting state. Then follow the instructions as listed above.
  NOTE: Moon phase is calculated automatically based on hemisphere, time, and date. This feature does not need to be updated or calibrated.
• In Time Mode, press PUSHER B to advance to Alarm Mode

ALARM MODE

ALARM MODE

• Press PUSHER C to toggle an alarm on or off - Alarm ON is indicated by bell icon

To set the ALARM time:

• Press and hold PUSHER B to enter Alarm setting state (hours will begin to blink)
• Press PUSHER C to increment the value
• Press and hold PUSHER C to quickly increment the value
• Press PUSHER D to decrement the value -Press and hold PUSHER D to quickly decrement the value
• Press PUSHER B to advance from hours to minutes -Press PUSHER A to confirm and exit setting state
• Press PUSHER C to toggle alarm on or off - Alarm ON is indicated by bell icon
• Press PUSHER B to advance to Chronograph Mode

CHRONOGRAPH MODE

CHRONOGRAPH MODE features

• Hundredth seconds resolution -Lap counter up to 99 laps

To operate the Chronograph:

• Press PUSHER C to start Chronograph run state -In run state, press PUSHER D to count a lap - display will freeze for 5 seconds
• In run state, press PUSHER C to stop the Chronograph
• Once stopped, press and hold PUSHER D to reset
• Press PUSHER B to advance to Timer Mode

TIMER MODE

TIMER MODE features

• Preset or Custom countdown timers -Seconds resolution

To set the TIMER:

• Press and hold PUSHER B to enter Timer Mode setting state
• Press PUSHER C to toggle between Preset or Custom Timer options (selection indicated in upper section), then press PUSHER B to advance to time selection:

To set CUSTOM Timer

• Press PUSHER C to increment the value, beginning with hours
• Press and hold PUSHER C to quickly increment the value
• Press PUSHER D to decrement the value -Press and hold PUSHER D to quickly decrement the value
• Press PUSHER B to advance through hours, minutes, and seconds
• Press and hold PUSHER B to confirm and exit setting state

To set PRESET Timer

• Once Preset is selected, press PUSHER B to advance to timer selection
• Press PUSHER C to scroll up and PUSHER D to scroll down through Preset Timers
• Press and hold PUSHER B to confirm and exit setting state

To operate the TIMER:

• Press PUSHER C to start the timer
• Press PUSHER D to stop the timer
• Press and hold PUSHER D to restart the timer -Press any pusher to stop the alarm once time has expired

WATER RESISTANCY RATINGS AND WATCH CARE

*RINSE WATCH WITH SOAP AND WATER AFTER EXPOSURE TO SALT WATER OR SAND.
Replace the battery at least every two years. Dead or low batteries left in a watch may leak and destroy the movement of your watch. If you have a water resistant watch, know that the water resistancy is attained using rubber or plastic seals which will deteriorate under normal conditions and reduce the water resistancy of your watch. These seals should be checked by an authorized jeweler at least every two years to ensure the rated water resistancy. Do not expose your watch to extreme temperatures (over 60ºC or 140ºF, under -10ºC or 14ºF). No hot tubs or saunas. Sorry, but do you really need to know the time when you're tubbing?
Avoid extreme shocks.
www.nixon.com