NIXON THE HIGH TIDE - Watch Manual

FEATURES

Custom high resolution MLCD digital module with front light, 550 pre-programmed beach locations with precise tide, sun, and moon data, chronograph with action time stamp, and countdown timer.

Press PUSHER B to advance through the modes in the following sequence:
TIME & TIDE, SUN & MOON, CHRONOGRAPH, & TIMER

In any mode, press PUSHER A to activate the light.

TIME & TIDE MODE

NEVER PUSH A BUTTON OR SET THE WATCH WHEN IT IS SUBMERGED.

TIME & TIDE MODE features time in 12 or 24 hour format, date, and tide with three different layout options: even split, detailed tide view, or tide graph.

• Press PUSHER C to toggle through the three layout options
• Press PUSHER D to scroll forward to future tide events
• Press and hold PUSHER D to switch to T2

To set the time, date, and tide location:

• Press and hold PUSHER B to enter setting state (seconds will highlight)
• Press PUSHER A to decrease the value & PUSHER C to increase the value
• Press PUSHER D to advance through time, date, and location options
• Press PUSHER B to confirm and exit setting state
• Press PUSHER B to advance to SUN & MOON mode

SUN & MOON MODE

SUN & MOON MODE features current moon phase and sunrise / sunset times

Time, date, and location are set in Time &

Tide mode

• Press PUSHER D to scroll forward to next full or new moon event
• Press PUSHER B to advance to CHRONOGRAPH mode

CHRONOGRAPH MODE

CHRONOGRAPH mode features timer with 1/100th second resolution, and split function with time stamp.

To use the CHRONOGRAPH:

• Press PUSHER D to start / stop the chronograph
• While running, press PUSHER C to split - mark a lap or wave

To review a session:

• When stopped, press PUSHER C to review your session details: start time, total time, average time between laps / waves, and time stamp for each lap / wave
• Press PUSHER D to scroll through pages of lap / wave times
• In stopped state, press and hold PUSHER D to reset (session details will be cleared)
• Press PUSHER B to advance to TIMER mode

TIMER MODE

TIMER mode features 3 preset and 3 customizable countdown timers

• Press PUSHER C to scroll through the preset and custom timers

To set a custom TIMER:

• Press and hold PUSHER B to enter setting state (minutes will highlight)
• Press PUSHER A to decrease the value & PUSHER C to increase the value
• Press PUSHER D to advance through minutes, seconds, and hours
• Press PUSHER B to confirm and exit setting state

To use the TIMER:

• Press PUSHER D to start / stop the timer
• Press and hold PUSHER D to reset when stopped

WATER RESISTANCY RATINGS AND WATCH CARE

*RINSE WATCH WITH SOAP AND WATER AFTER EXPOSURE TO SALT WATER OR SAND.

Replace the battery at least every two years. Dead or low batteries left in a watch may leak and destroy the movement of your watch. If you have a water resistant watch, know that the water resistancy is attained using rubber or plastic seals which will deteriorate under normal conditions and reduce the water resistancy of your watch. These seals should be checked by an authorized jeweler at least every two years to ensure the rated water resistancy. Do not expose your watch to extreme temperatures (over 60ºC or 140ºF, under -10ºC or 14ºF). No hot tubs or saunas. Sorry, but do you really need to know the time when you're tubbing?

Avoid extreme shocks.

WARRANTY INFO

Nixon offers a limited warranty of defects in materials and workmanship for a period of two (2) years after original purchase from an authorized Nixon dealer.

PROBLEMS?
Contact your closest Nixon Service Center and we'll do what we can to resolve the problem. If you're in North America, visit our Online Repair Center or call us at (888) 455-9200 from 8 to 5 pacific time, Monday to Thursday, 9 to 5 pacific time Friday, and we'll talk you through a solution or get you a service authorization number.

www.nixon.com