Gas Booster Specifications; Specifications For Gas Boosters - Rinnai SPLIT SOLAR Operation & Installation Manual

SPECIFICATIONS FOR GAS BOOSTERS

GAS BOOSTER SPECIFICATIONS

* Table 4 - Gas Boosters Specifications
Model Name
Boost Capacity:
- L/min. @ 20°C rise
- L/min @ 25°C rise
Maximum Rated Flow:
Minimum Water Supply Pressure for
(1)
Maximum rated flow:
Frost Protection:
Gas Consumption (Maximum /
Minimum):
Hot Water Delivery Temperature:
Dimensions: Height x Width x Depth:
Weight:
(1)
- Units will operate at lower pressures but the rated flow will not be achieved.
(2)
- Gas boosters for Solar hot water applications must be set by Rinnai to deliver a minimum temperature of 70°C. Solar Gas boosters
will be marked as Solar. Units not marked 'Solar' MUST NOT be used.
These models are made to order.
*
Rinnai Australia
S20
(L/min)
20
16
(L/min)
20
(kPa)
120
(MJ/
125 - 18
Hr)
(2)
(mm)
(Kg)
15
- 16 -
S26 S26i *
26 26
24 24
26 26
200 200
Yes
188 - 23 188 - 14
70°C
530 x 350 x 194
21 15
Solar Split Systems Operating / Installation Manual- Version 9 - 21/11/12
S32 *
37
32
37
180
250 - 21
600 x 470 x 244
29