For All Other Models; Gas Supply & Pressures; Wiring Diagram; Commissioning Check List - Rinnai HD210e Operation & Installation Manual

Gas continuous flow water heater
Hide thumbs Also See for HD210e:
Table of Contents

Advertisement

COMMISSIONING

For All Other Models

Rinnai gas continuous flow water heaters are factory pre-set to various maximum delivery temperatures depending
on model and their intended application. For the majority of applications, the factory pre-set temperature is
appropriate. In the unlikely event it is not this setting can be increased or decreased by the installer. Instructions for
changing the maximum delivery temperature are located in the instruction pocket inside the appliance front cover.
GAS SUPPLY & PRESSURES
DO NOT ADJUST the regulator / solenoid valve of the appliance, as it is factory pre-set and
electronically controlled and so DOES NOT require ANY adjustment.
CAUTION
DO NOT change the gas type. The gas type MUST be the same as that found on the appliance
labelling, if the gas type differs from that shown on the appliance, DO NOT proceed and contact
Rinnai.

WIRING DIAGRAM

The wiring diagram is located in the instruction pocket inside the appliance front cover.

COMMISSIONING CHECK LIST

A commissioning check list is provided on the appliance front cover to enable the installer to step through the
correct commissioning procedure when installing a Rinnai gas continuous flow water heater.
The check list can also assist the installer to identify potential installation errors that may prevent the appliance
from operating correctly.

INSTALLATION RECORD

The Installation Record is a reference for the end user, help line staff and service technicians. Ensuring that this
information is available here will be helpful in the event that a service enquiry is required.
Installer Details
Installation Company Name:
Telephone / Mobile Phone:
Certificate of Compliance / Certification No.:
Authorised Persons - Licence No.:
System Details
Water Heater - Model Number *: REU-
Water Heater - Serial Number *:
* This information will need to be copied from the data plate, located on the left hand side of appliance.
Rinnai
Address:
Email:
Installers Name:
Installers Signature:
Installation Date:
Installation Address:
/
28
HW_HD_CF OIM

Advertisement

Table of Contents
loading

Table of Contents