Data (Psk) Operation - Yaesu FT DX 1200 Operation Manual

DATA ( PSK ) O
PSK T
hrases up to 0 characters) fre uently used in S
emote Control eypad to the rear panel
can be transmitted by operations on the FH-2.
T M P
EXT ESSAGE ROGRAMMING
ress the [ MODE ] button to set the operating mode
1.
to T .
ress the FH-2 [ MEM ] key.
.
will appear in the display.
ress an FH-2 [ 1 ] [ 5 ] key to select the desired
3.
S Text emory egister into which you wish to
program the text, the blinking "REC" icon will dis-
appear.
4. Use the FH-2 [ ] and [ ] keys to set the cursor po-
sition and use the FH-2 [ ] and [ ] keys to choose
the letter number to be programmed in each slot of
the memory.
A :
DVICE
You may also use the [
gram the message characters.
. When the message is complete, add the " " character
at the end to signify the termination of the message.
ress and hold in the FH-2 [ MEM ] key for one sec-
6.
ond to exit, once all characters including " ") have
been programmed.
E
You can use commercial and free computer software for S data communications. See the illustration below for con-
nection to your computer.
Be sure to read the instruction manual
See page 13 for details on the connections and settings to use the optional USB Interface Unit "SCU-17".
A :
DVICE
You can set the data output level for data communi-
cations S 31, SSTV, etc.) using
DATA OUT LEVEL".
Page 106
PERATION
M
EXT EMORY
jack.
blinking "REC" icon
] knob to pro-
VFO-B/CLAR
D
XAMPLE OF ATA
of the device to be connected to the radio and computer.
enu item "078
(
O FFT U
WITH PTIONAL
transmissions can be recorded by connecting the optional FH-2
memory channels may be recorded, and the memori ed content
O -T -A PSK T
N HE IR
ress the FH-2 [ 1 ]
Text emory egister message you wish to transmit.
The programmed message will be transmitted on the air.
A :
DVICE
You can adjust the S
[ MIC/SPEED ] knob.
PSK TEXT
C
OMMUNICATIONS
You can set V
communications
item "080 DATA VOX DELAY". You can also set data
input V gain using
GAIN".
Interface device
commercially
available
FT
DX
)
NIT
M P
EXT ESSAGE LAYBACK
[ 5 ] key, depending on which S
transmit LC by turning the
D
EVICE
L Y in V operation for data
S 31, SSTV, etc.) using
enu item "079 DATA VOX
To LINE IN/MIC IN,
LINE OUT/MIC OUT,
COM port, etc.
1200 O M
PERATING
enu
ANUAL