Yaesu FT DX 1200 Operation Manual page 26

F P
RONT ANEL
[ BAND ] Keys
These keys allow one-touch selection of the desired
mateur band 1.8 0
The keys may also be used for direct entry of a de-
sired operating fre uency during VF operation.
[ RX CLAR ] Switch
ressing this button activates the
will allow you to temporarily adjust the receive fre-
kH with the [ VFO-B/CLAR ]
uency up to .
knob. ress this button once more to return the re-
ceiver to the original fre uency the Clari er offset
will be remembered, in case you want to use it again.
To cancel the Clarifier offset, press the [ CLEAR ]
button.
ressing this switch during Split operation will
change the tuning rate of the [ VFO-B/CLAR ] knob
VF -B) to 100 H step.
When this function is activated, the "FAST" indica-
tor in the L indicators area illuminates.
Page 24
C
ONTROLS
H ).
Clari er. This
& S
WITCHES
[ TX CLAR ] Switch
ressing this button activates the T Clari er, to al-
low offsetting the transmit fre uency temporarily.
ress this button once more to return the transmit-
ter to the original fre uency the Clarifier offset
will be remembered, though, in case you want to
use it again. To cancel the Clari er offset, press the
[ CLEAR ] button.
[ CLEAR ] Switch
ressing this button clears out any fre uency offset
you have programmed into the Clarifier register
thereby setting the offset to "Zero").
ressing this switch during Split operation toggles
locking on off for the [ VFO-B/CLAR ] knob VF -
B). With "Lock" on, the [ VFO-B/CLAR ] knob can
still be turned, but the fre uency will not change, and
the "LOCK" indicator in the L
luminates.
F T 12 00 O
DX
indicators area il-
M
PERATING ANUAL