Descaling Program - Krups Espresseria Automatic Instructions Manual

FALCON PICTO anglais USA.qxp
DESCALING PROGRAM – TOTAL DURATION: ABOUT 22 MINUTES.
The quantity of scale deposited depends on the hardness of the water used. The machine will automatically warn
you by the 'calc' light coming on when you need to proceed with descaling. This program is available only when
the appliance requests it.
Caution! To benefit from the warranty conditions, it is essential to perform the machine descaling
cycle when informed to do so. Be sure to follow the procedure closely step by step.
You can continue to use the machine when the light is on, but you are advised to perform the program as soon as possible.
Make certain to protect your work surface during descaling cycles, especially if they are made of marble,
stone or wood.
Press the 'Service' key
to start up the desca-
ling program.
The "calc"
and lights
will flash.
Only use Krups descaling products. You can obtain descaling products from Krups Service Centers.
Do not use conventional starchy sulphonic acid or other products containing acid.
The manufacturer may not be held responsible for damage to the machine through use of cleaners or descalers
not specifically recommended.
1 – Descaling cycle
The "calc" light will become solid. The descaling cycle will have started and will be run automatically. Water is pumped inter-
mittently to be expelled by the coffee nozzle and then the steam nozzle.
2 – First rinsing
A first rinsing is needed to eliminate the remaining descaling agent.
This cycle is run automatically. It lasts about 6 minutes.
Empty your container
full of waste water.
25/02/08
If your product is equipped with our Claris-Aqua Filter System cartridge F088, please
remove this cartridge before the descaling operation.
Remove and clean the
Place a container with a
drip tray. minimum water capacity
of 0.6 l/20 oz under the
coffee outlets and
under the steam nozzle.
Replace the water tank.
The light will go off
and the 'calc' light
become solid.
Empty, clean and rinse
Empty the drip tray and
the water tank and
re-insert. Place your
then fill it again up to
container again under
the max. level.
the coffee outlets and
steam nozzle.
18:36 Page 14
Empty the tank and fill
it with lukewarm water
up to the 'calc' mar-
king.
Once you have
performed all these
operations, press the
'Service' key.
Replace your water
tank. The 'calc' light will
flash and the
will go off.
14
F054
Dissolve a sachet of
Krups descaling
powder F054 (40 g).
± ± 10 mn
When the cycle is
completed, the
and 'calc' flash.
± ± 6 mn
Press the 'Service' key.
The 'calc' light will
become solid. The cycle
light
will run automati-
cally and last about
6 minutes.