Basic Network Settings; Wireless Lan Settings - Dericam H501W User Manual

Shenzhen Dericam Technology Co.,LTD

5.7 Basic Network Settings

1------Obtain IP from DHCP Server
2------Http Port

5.8 Wireless Lan Settings

Click Scan to search the SSID of the wireless router. Please make sure you click scan to search until the SSID of
your router is list on the small window showed as Fig5.8.
Select the SSID belongs to your router, and enter wireless security key password, and click set to finish the wireless
setup. When the wireless settings is done, please unplug the network cable, and unplug the power & plug the power
back in order to let the camera get restarted. After restart by unplug & plug back the power adapter, the camera will
make wireless connection by itself.
The Camera device name will disappear if you click "search" before the camera gets restarted. Just wait for around
1 minute, and click "Search" again, the device name of the camera will be showed again on the window if wireless
connection is successful.
www.dericam.net
Fig5.7
Enable DHCP, if disable DHCP, you can assign IP address by yourself
You can change port no. here by entering customized no. and click set
Fig5.8
Congratulations! You have done wireless connection of the camera successfully.
Copyright @ Shenzhen Dericam Technology Co., Limited
Basic Network Settings
Wireless LAN Settings
14
H501W User Manual
tech@dericam.com