Table of Contents
Advertisement
Shenzhen Dericam Technology Co.,LTD
④Step 4, Wait for the camera getting wireless connection
The Camera device name will disappear on the window of IP Cam Search Tool if you click
"search" before the camera gets restarted. Just wait for around 1 minute, and click "Search"
again, the device name of the camera will be showed again on the window as Fig4.3.
Congratulations!
You have done wireless connection of the camera successfully.
Note
If fail to make WiFi connection, please refer to seller or us for help.
5. Remote Access Settings
We have been able to access the camera within the LAN network, but how to access the camera
via WAN or via internet? We have to do Remote Access Settings before we want to access
the camera outside the LAN network.
1) Default HTTP Port No.: 80
All the cameras' default http no. is 80. For example, if the LAN IP link of the camera is
http://192.168.1.35, it says that the camera's http port no. is 80, if the LAN IP link of the camera is
http://192.168.1.35:88, it says that the camera's http port no. is 88. Port 80 could be blocked
when accessing via internet, we need to change port 80 to another one like 88, or 85 as
you like, which will not be conflict with other existing ports like 25, 21.
www.dericam.net
Fig4.3
Wireless LAN Settings
Dericam provide online technical support via email
8
Quick Installation Guide
tech@dericam.com
Advertisement
Table of Contents
