Dericam H501W User Manual page 7

Shenzhen Dericam Technology Co.,LTD
4.2.2 Section 2
1------Up control button,
2------Down control button,
3------Left control button,
4------Right control button,
5------Vertical Patrol control button,
6------Stop vertical patrol control button,
7------Horizontal Patrol control button,
8------Stop horizontal patrol control button,
C------Restore center position
Dericam indoor PTZ IP camera M801W supports movement by 4 directions, Up, Down, Left and Right.
4.2.3 Section 3
The four buttons from left to right is Record, Snap, Playback, SD entry.
4.2.4 Section 4
1) Preset----------Support 8 preset position, which is considered enough for DIY home & small business surveillance
market
2) Set----------- Click Set to save the position you need the camera to remember
3) Go----------- Click Go to make the camera move the preset position
4) Number button from 1 to 8--------You can click the number button with preset position, and the camera will go to
the preset position.
www.dericam.net
Pan/Tilt Control
You can also left click the surveillance window up to control the camera move up.
You can also left click the surveillance window down to control the camera move down.
You can also left click the surveillance window left to control the camera move left.
You can also left click the surveillance window right to control the camera move right.
Record/Snap/Playback/SD buttons
Preset Position Settings
Copyright @ Shenzhen Dericam Technology Co., Limited
7
H501W User Manual
tech@dericam.com