Auto Mode; Setting The Timer; Sleeping Mode - Challenge Instruction Manual

AUTO MODE

This appliance is equipped with a built-in program to adjust the operation mode (FAN / Air-
conditioning) and fan speed (High / Low) by itself under this mode. Press the mode button
continuously until the AUTO mode indicator
to adjust the setting of the desired room temperature. Continue
until the desired temperature is selected. The temperature can be adjusted from 18 C to
Once the desired room temperature is reached, the compressor will turn on and off automatically
maintaining the room temperature that you have set. After finished setting, the display will revert
to room temperature.

SETTING THE TIMER

When the appliance is on, press the timer button to enter the timer mode. Continue to press
the time button and
the timer mode will be turned off. Select
ON and the indicator will be illuminated. When the set times
turn
off itself automatically. When the appliance is off, you can set the timer to
by pressing the button to set the time. The appliance will turn itself on once the time is arrived.
finished setting, the display will revert to the room temperature.
After

SLEEPING MODE

While operating under the air-conditioning mode, press the SLEEP button to enter the
sleeping mode. The unit will automatically increase 1 C at the 1
o
1 C in the second hour. Then it will keep to run at that temperature. The fan speed will
changed to low fan speed. After continuous running for 12 hours under the sleeping
mode, the unit will shut itself down automatically.
To cancel the sleeping mode, press the SLEEP button again. It will switch back to the
previous operation mode.
Note: The sleeping mode is not available while the unit is working under the AUTO or
FAN mode.
the time will switch from 0>1.....11>12 >0. Select the time to be "0", then
is illuminated. The only thing you need to do is
the time to be "1 to 12", then the timer m ode will be
o
11
to press or
is arrived, the appliance will be
st
hour and add another
button
o
o
32 C.
turn itself on