Using Your Vl1 With A Pc - Securesight VL1 Manual

Using your VL1 with a PC

Important : You must install a camera driver before connecting your VL1
to your PC otherwise it will not work.
When you connect your VL1 to a PC using a USB lead you can use the VL1
as a web camera or directly access the SD as a removable disc drive.
Camera driver
Your VL1 will not work with your PC unless you first install the camera
driver. This is a small piece of software that you can download from the
registration page of our web site at
www.securesight.com/registration
You will need to enter the serial number of your VL1. This is located on
the side of the junction box.
Follow the on screen instructions to download and install the driver. The
VL1 is designed to work with a PC operating Windows XP, please see our
web site for compatibility with other computers and operating systems.
Once installed, connect your VL1 to your PC via the USB lead provided. It
is possible to use a 5m USB extension lead to enable permanent access to
your VL1.
Page No. 49
©Securesight 2009 E&OE Issue 1.0