Securesight VL1 Manual page 10

Carefully and without touching the glass of the bulb fit the halogen bulb
ensuring you secure the floodlight glass cover afterwards.
NOTE: Halogen bulbs get very hot and contamination from your skin can
cause the glass to break during operation.
We recommend positioning the unit between 3m and 4m on a sound wall
and angled towards the area of interest so that most traffic crosses the
PIR zones and triggers your VL1 to start recording.
Good results can also be obtained by positioning the VL1 higher and
facing down to the area of interest
See the section VL1 mounting and the movement sensor for details.
You can replace an existing outside light or undertake a new installation.
Page No. 9
©Securesight 2009 E&OE Issue 1.0