Table of Contents
Advertisement
When you have set the correct value for the year, pressing the Menu key
will save the date and return you to the Time and Date entry menu.
Now select the Time. The display will be similar to:-
Press the Menu key
the seconds. When you have set the correct value for the seconds,
pressing the Menu key
returning you to the Time / Date menu.
When you have set both date and time, press the Exit key
menu or wait for approximately 20 seconds for the software to return to
the idle state.
NOTE: After leaving the menu and returning to the normal screen or
after a reset or power up, your VL1 will take approximately 1 minute to
arm. During this time the LED will flash rapidly. After this period, your
VL1 will begin recording when movement is detected.
You can now position your VL1 ready for action.
Page No. 13
The format is HH:MM:SS
Use the up
to move to the minute setting, change this then
will save the time and start the clock running,
©Securesight 2009 E&OE Issue 1.0
and down
keys to change the hour.
to exit the
Advertisement
Table of Contents
