Table of Contents
Advertisement
Advanced settings and functions
The VL1 works straight from the box but it also has a simple and easy to
operate menu system so you can change any settings. When you first
power it the floodlight will come on for a short time and the LED will
flash rapidly as the VL1 arms. When this rapid flashing stops, your VL1
will be ready to record whenever movement is detected day or night.
The normal screen on your VL1 display will show the number of
recordings, the Image Mode and the Photo Resolution settings. When
recording it will say Recording on the screen. You cannot access the
menu of your VL1 whilst it is recording.
navigate and the Menu key
The menu structures are described below along with details of each
setting to help you understand its function.
The two main menus are
·
Main Setup
·
Image Setup
Page No. 27
To enter and explore the menu, press the Menu key
on the base of the VL1. Press the Exit key
exit any menu at any time without saving your
changes. Use the Up
to enter a menu or save a setting.
©Securesight 2009 E&OE Issue 1.0
and Down
to
arrow keys to
Advertisement
Table of Contents
