Table of Contents
Advertisement
Main Setup menu
Press the menu key
to enter the Main Setup menu.
Use the up
and down
arrow keys to select a menu option and the
Menu key
to enter that option. You can press the Exit key
to exit
a menu at any time without saving any changes.
NOTE: When in a menu, if you do nothing for 20 seconds the software
will return to the normal screen.
NOTE: When you exit the menus and return to the normal screen your
VL1 will take approximately 1 minute to arm. During this time the LED
will flash rapidly. After this period, each time the VL1 detects movement
it will begin recording and the light will come on if appropriate.
Page No. 30
©Securesight 2009 E&OE Issue 1.0
Advertisement
Table of Contents
