Floodlight On Time - Securesight VL1 Manual

Floodlight on time

When the Floodlight menu option is set to LUX the time that the
floodlight stays on for is determined by the TIME control of the base of
the VL1.
Move the TIME control to the position to set it to minimum on time of
approximately 7 seconds.
Move the TIME control to the + position to set it to the maximum on time
of approximately 7 minutes.
Arming period
Following power up or after you exit the main menu the LED on your VL1
will flash rapidly for approximately 1 minute before arming and
becoming ready to start recording.
If the LED mode is set to Flash, when the unit is ready to operate the
LED will begin flashing slowly every 5 seconds.
Page No. 21
When the Floodlight option is set to Auto, the on
time is controlled by the camera. If necessary,
the floodlight will come on and stay on for the
duration of recording regardless of the TIME
setting. It will go off approximately 5 seconds
after recording ends.
©Securesight 2009 E&OE Issue 1.0