Listening To The Satellite Radio - JVC GET0638-001A Instruction Manual

Listening to the satellite radio

Before operating, connect either one of
the following systems (not supplied) to the
expansion port on the rear of this unit.
For listening to a SIRIUS Satellite radio:
• SC-C1 and KS-SRA100
• PnP, SC-VDOC1 and KS-SRA100
For listening to an XM Satellite radio:
• JVC Smart Digital Adapter (XMDJVC100)
• CNP2000UC and CNPJVC1
• For details, refer also to the instructions
supplied with the other components.
GCI (Global Control Information)
update
• If channels are updated after subscription,
updating starts automatically. "UPDATING"
flashes and no sound can be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your
satellite radio.
~
] "SIRIUS" or "XM"
Ÿ
] Select a category.
SIRIUS: If you select "ALL," you can
tune in to all the channels of all
categories.
18 ENGLISH
!
] Select a channel to listen.
Holding the button changes the
channels rapidly.
While searching, invalid and
unsubscribed channels are skipped.
XM: If you do not select a channel
within 15 seconds, category selected
in step Ÿ is canceled. You can select
all channels of all categories now
(including non-categorised channels).
Activate your SIRIUS subscription after
connection
1
] "SIRIUS"
SIRIUS Satellite radio starts updating all
the SIRIUS channels. Once completed,
SIRIUS Satellite radio tunes in to the
preset channel, CH184.
2
Check your SIRIUS ID. (
3 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can
call SIRIUS toll-free at 1-888-539-SIRIUS
(7474).
• "SUB UPDT PRESS ANY KEY" scrolls on
the display once subscription has been
completed.
25)