Listening To The Satellite Radio - JVC KD-ADV6270 Instructions Manual

Listening to the satellite radio

Before operating, connect either one of the following (separately purchased) to the CD changer jack
on the rear of this unit.
• JVC SIRIUS radio DLP—Down Link Processor, for listening to the SIRIUS Satellite radio.
• XMDirect Universal Tuner Box—Using a JVC Smart Digital Adapter (XMDJVC100: not
TM
supplied), for listening to the XM Satellite radio.
GCI (Global Control Information) update:
• If channels are updated after subscription, updating starts automatically.
"UPDATING" flashes and no sound can be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite radio.
Activate your SIRIUS subscription after
connection:
1
2
JVC DLP starts updating all the SIRIUS
channels.
Once completed, JVC DLP tunes in to the
preset channel, CH184.
3 Check your SIRIUS ID, see page 28.
4 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can
call SIRIUS toll-free at 1-888-539-
SIRIUS (7474).
"SUB UPDT PRESS ANY KEY" scrolls
on the display once subscription has been
completed.
Activate your XM subscription after connection:
• Only Channel 0, 1, and 247 are available
before activation.
1
2
XMDirect Universal Tuner Box starts
TM
updating all the XM channels. "Channel 1"
is tuned in automatically.
3 Check your XM Satellite radio
ID labelled on the casing of the
XMDirect Universal Tuner Box, or
TM
tune in to "Channel 0" (see page 22).
4 Contact XM Satellite radio on
the internet at <http://xmradio.
com/activation/> to activate your
subscription, or you can call 1-800-
XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one
of the available channels (Channel 4 or
higher).
21
Continued on the next page
EXTERNAL DEVICES