Changing The Bluetooth Settings - JVC GET0638-001A Instruction Manual

Changing the Bluetooth settings

1
] "BT-PHONE" or "BT-AUDIO"
2
] Bluetooth menu
3
] "SETTINGS"
4
] Select a setting item.
AUTO CNNCT j AUTO ANSWER *
j MSG INFO *
j VERSION *
3
beginning)
5
] Change the setting accordingly. For
setting menu,
1
* Appears only when a Bluetooth phone is
connected.
2
* Appears only when a Bluetooth phone is
connected and it is compatible with text
message (notified through JVC Bluetooth
adapter).
3
* Bluetooth Audio: Shows only "Version."
1
j MIC SETTING *
2 1
j (back to the
right column.
Setting menu
[Initial: Underlined]
AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with...
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth
device found at first.
AUTO ANSWER
Only for the device being connected for
"BT-PHONE."
ON: The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls
manually.
REJECT: The unit rejects all incoming calls.
MSG INFO (message info)
Only for the device being connected for
"BT-PHONE."
AUTOMATIC: The unit informs you of the
arrival of a message by ringing
and displaying "RCV MESSAGE"
(receiving message).
• The display illuminate in blue.
(<RING COLOR>,
MANUAL: The unit does not inform you of
the arrival of a message.
MIC SETTING (microphone setting)
Only for the device being connected for
"BT-PHONE." Adjust microphone volume
connected to the Bluetooth adapter,
[LEVEL 01/02/03].
VERSION
The Bluetooth software and hardware versions
are shown.
26)
ENGLISH 15