Changing The Bluetooth Settings - JVC KW-XR810 Instructions Manual

Changing the Bluetooth settings

1
2
] <Bluetooth> ] <Setting>
Setting item
Auto Connect
Auto Answer
Message
Notice
MIC Setting
NR/EC Mode
Ringing Tone
20 ENGLISH
[Hold]
Selectable setting, [
• Last : The connection is established automatically with the last
connected Bluetooth device when you turn on the unit.
• Off : The unit does not connect the Bluetooth device automatically.
Connect the device manually. (
• On : The unit answers the incoming calls automatically.
• Off : The unit does not answer the calls automatically. Answer the
calls manually. (
• On : The unit informs you of the arrival of a message by ringing and
displaying "Received Message."
• Off : The unit does not inform you of the arrival of a message.
— : Adjust the volume of the microphone connected to the unit.
[ Level 01/02/03 ]
• On : The unit adjusts the Noise Reduction and Echo Cancelation of
the microphone connected to the unit for clearer sound.
• Off
: Cancels.
• In Unit : The unit rings to alert you when a call/Text Message comes in.
Call:
Message: Select your preferred ring tone when a Text
• In Phone : The unit rings (using the connected phones' ring tone) to
alert you when a call/Text Message comes in. (The connected
mobile phone rings if it does not support this feature.)
3
] Select a setting item, then repeat
the procedure to change the setting
accordingly.
• To return to the previous menu, press BACK.
• To exit from the menu, press DISP or MENU.
Initial: Underlined
18)
Select your preferred ring tone when a call comes
in. [ Tone 1/2/3 ]
Message comes in. [ Tone 1/2/3 ]
]
16)