JVC GET0626-001B Instruction Manual page 31

Symptom
Disc cannot be played back.
Noise is generated.
A longer readout time is
required ("READING" keeps
flashing on the display).
Tracks do not play back in the
order you have intended them
to play.
The elapsed playing time is not
correct.
The correct characters are not
displayed(e.g. album name).
Bluetooth device does not
detect the unit.
The unit does not detect the
Bluetooth device.
* For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
Remedy/Cause
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo,
orJoliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
Skip to another track or change the disc. (Do not add
the extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Do not use too many hierarchical levels and folders.
The playback order is determined when the files are
recorded.
This sometimes occurs during playback. This is caused
by how the tracks are recorded on the disc.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
The unit can be connected with one Bluetooth mobile
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select "OPEN" on the unit to connect
the device. ( 10)
ENGLISH 31